Energy Box 1.0

ENERGY BOX 1.0

Ready for 2024-2025 by CIG Fox 

Cypress Devision 3 project 

Basic non-vibrational Energy Box application 

The device installed involves a box inserted into the road or bridge & or highway in a section where a section replaces the pavement or concrete surface 

The inserted box has a moving cylinder which has a traction treatment where wheels make contact with to spin another axel within the box which speeds up with force them releases & brakes against a regenerative braking system before re-attaching speeding up & again releasing then braking while the spinning surface cylinder vehicle wheels touch unoticed is continually spun by the traffic driving over  

WINTER & SNOW 

This is a seasonal or climate specific design first as in winter conditions require a cover for snow removal & heating system then an application which assists snow covered areas to the box application which may not be aligned smoothly requiring traffic to slow for winter use with snow coverage 

Applications can create energy for grid use or to charge batteries including modern air or salt applications

Unit cost per unit 

8ft wide or 16 ft section for one lane on single axel design. Track & 3, 5 or 8 axel applications increase in increments by 15-25% per axel set increase 

Cost $80

CIG Fox Profit $150 60% 

Installation $20 

$250 US Dollar per unit 

Usage 

CIG Fox Profit 20% 

Client 60%

Investors 20%

Low cost maintenance under $100-250 forecasted in replacement parts every 60-120 months as required. Compression pneumatic pulse regen from vibration with an axel system sinning then braking continually repeated as traffic rolls over top the road section 

Zero emissions. Safe. Simple & low cost 

All international patents & copyrights belong to CIG Fox & Dr Nic Bennett 

Currently developing seasonal winter snow-ice climate designs at a $30-$100 premium on installation to void freezing without melting road surfaces creating hazards 

Energy Production 

144+ Watt Hours generated at 60 MPH or 100 Km/h every 20-60 seconds in use with vehicles driving over 

72.5+ Watt Hours generated at 30 MPH or 50 Km/h every 20-60 seconds in use with vehicles driving over 

- Every revolution of the internal cylinder which brakes then redevelops speed then brakes on a cycle of one axel runs at 72.5-144 Watts of energy production per revolution or a multiple axel track system can be installed in 3, 5 & 8 spinning continually then braking before restarting in the P.M.E Energy Box system which increases the Watt production per revolution yet maintenance costs increase for each track & axel - braking system 

100 - 96.561 kilometres per hour 60

0.145 kWh at 3200 lb force calculated 

80 - 80.467 kilometres per hour 50

50 - 48.28 kilometres per hour 30

0.0725 kWh at 3200 lb force calculated 

60 - 56.326 kilometres per hour 35

40 - 40.234 kilometres per hour 25

30 - 32.187 20 kilometres per hour 20

TAKING ORDERS FROM CLIENTS 

We will be installing a test area then production will begin on orders once clients can see real results in live action for 2024-2025

There may be interest in over 10 billion units by 2026 or prior to 2030 as forecasted 

Profits expected to start 

$1.5 Billion USD on 10 Million single axel 8-16 ft units then 20% on usage returns 

Dr Nic Bennett. 99% majority shareholder & inventor, engineer & physicist 

All international patents & copyrights belong to CIG Fox & Dr Nic Bennett 

The Commonwealth Group. CIG Fox Research